24
MANUGENETOP3xx - Version 2.00
© 2018 EXOR International S.p.A. - Subject to change without notice
The panels have an extended set of pre-defined commands. Commands are available for the use of the
built-in system functions including navigation in all system pages.
The chapter describes the touchscreen commands recognized by all panels. Commands are classified
according to the operating modes of the unit.
CLEAR
ENTER
Panels with touchscreen interface will show a touch keypad on the screen whenever operator input in
required. For System Commands the default keypad in shown in figure. All keypads, except the one shown
in Configuration Mode, can be changed by the programmer.
Touch screen panels will show automatically a numeric keypad whenever the data entry phase is acti-
vated. Pop-up keypads are configurable by users.
11 Command Summary
CAUTION
The standard command assignment is described in this chapter. All the commands, except those
defined for Configuration Mode, can be changed, deleted and/or extended using the Keyboard
Macro Editor facility of the programming software.
Note:
The text ‘2 s’ associated to a key means that the key must be held pressed for two seconds to
activate the associated function.
