30
Performing treatment
GB
8.5
Adjusting appliance settings
You can adjust all settings on the drying hood M50 by turning and/or pressing
the control dial. You can see your settings in the display on the control panel.
Turning the control dial changes the values in the appliance settings.
Starting from the drying time setting, each single press of the control dial
moves sequentially through the appliance settings for temperature, blower set-
ting and finally drying time again (in a loop).
The appliance setting display for temperature and blower setting automatically
reverts to the drying time setting after 10 seconds.
Setting drying time
•
Turn the control dial and set the desired drying time.
-
The appliance starts.
-
The two operating lights are lit.
NOTE:
•
You can adjust the drying time at any point during the treatment by turning
the control dial.
•
For safety reasons, the total treatment duration is limited to 60 minutes. If it
is necessary to extend the drying time beyond 60 minutes, the appliance
needs to be restarted by turning the control dial to enter a time.
•
The drying time is then once again limited to a maximum of 60 minutes.
Setting temperature
1. Press the control dial until the appliance setting for temperature is selected.
-
The temperature symbol flashes.
-
Temperature setting 8 is preset and recommended.
2. Turn the control dial and set the desired temperature setting.
Setting blower setting
1. Press the control dial until the appliance setting for blower setting is selected.
-
The blower symbols flash.
-
Blower setting II is preset and recommended.
2. Turn the control dial and adjust the blower setting to setting I or setting II.
•
The temperature and the blower setting can be adjusted at any time.
Control panel
ON/OFF
switch
Blower symbols
Control dial
Temperature symbol
Operating lights
Drying time
Temperature
setting
__M50.book Seite 30 Freitag, 5. November 2021 10:06 10
