Exodraft RSHG, Manual

Page: 5 / 16

Before fitting onto a steel chimney
Step Action
1 A flange (C) is used, fitted so that the spigot end sits
inside the chimney (D).
A
B
C
D
2 Place the mineral wool mat (B) on the flange (D) and cut
a hole in the mineral wool mat (the hole being the same
diameter as the flange hole).
3 Cut the corners of the mineral wool mat, so there is room
to fit the vibration dampers (B).
If a temperature sensor is to be installed with the
chimney fan, make room for it by cutting a piece of the
mineral wool mat. This also ensures that the mat sits
level on the chimney.
4 Fit the flange to the chimney fan, with the use of
vibration dampers supplied with the flange.
5 The fan can now be fitted onto the chimney.
Fitting the chimney fan onto the chimney
Step Action
1 The chimney fan can now be fitted into place. Place the
mi¬neral wool mat on top of the chimney (it can be used
with either side facing the fan), and place the fan on top.
3000126-RSHG-UK-DE 20200204
UK •
5