Safety
Safety and Instructional Decals
•
Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
•
Replace all worn, damaged, or missing safety
signs.
•
When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
•
If an attachment or accessory has been installed,
make sure current safety signs are visible.
•
New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
•
Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
•
Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
109-6809
1.
Crushing hazard of hand—Do Not remove the whole bagger from the machine. Step 1: Open the bagger top. Step 2:
Remove the bag(s) from the bagger. Step 3: Do Not remove the bagger top when it is closed; open the bagger top
and then remove it.
126-4661
1.
Warning-Read the Operator’s manual for correct
quantity of counterbalance weight(s).
2.
Loss of traction and steering or reduced stability
hazard-Ultra Vac counterbalance weight(s) installed
without Ultra Vac may cause loss of traction and
steering control. Ultra Vac installed without Ultra Vac
counterbalance weight(s) will cause reduced stability.
Install weight(s) only when Ultra Vac is installed.
8
