4. Hardware
This chapter will guide you through the correct installation procedures for the LCD monitor.
4.1. Checking the Accessories Supplied
z
LCD monitor body + Desk Stand x 1 pc
z
AC power cord x 1 pc
z
Adaptor x 1 pc
z
D-Sub 15-pin cable (1.8 Meter) x 1 pc
z
Remote controller x 1 pc (Optional)
z
Battery (AAA) x 2 pc (Optional)
5.
Buttons and Connections
5.1 Buttons
○
1
○
2
○
3
○
4
○
5
○
1
“Source/Exit”
1. To select the input signal source when the OSD menu is Off. The available signal source will be shown
in the following order: PC,AV1,S-Video1 .
2. To exit the menu when you finish the setting.
○
2
“
▼/
-
” Down/Decrease:
To move the cursor downwards or to switch over the setting items or to decrease the figure of the setting
selected.
○
3
" Power :
Press button to turn the power on and press again to turn the power off.
f
”
▲
/
+
”
Up/Increase
:
To move the cursor upwards or to switch over the setting items or to increase the figure of the setting
selected.
g
“Menu/Enter”
:
To Enter the OSD menu or confirm the setting.
7
