OSD Blend
If you want to change the background color of OSD Menu, you may press “
▲/+” or “▼/-“
key to select
“ Background color” . Press “Enter” key and press “
▲/+” or “▼/-“
key to increase/decrease the “Blue bar”, the
color will change from light blue to dark blue.
Sleep Time
The function will make the monitor in sleep mode to save the power when monitor is in standby mode. To
press “Enter” to enter the option and press
“
▲/+” or “▼/-“
key again to select (1). 10 Min (2). 20 Min. (3).30 Min
(4). 60 Min (5).90 Min (6).120 Min (7).150 (8).180 (9) Off. To select 10 Min that means the monitor will enter
sleep mode when monitor is in standby mode for more than 10 Min. The other time options are the same rule.
Anti Burn-in
The function can prevent the LCD panel from burn-in when camera or DVR is always displaying the same
picture source at all times. Press “
▲/+” or “▼/-“
key to select “ Anti Burn-in” and press “Enter” to enter the
option and press
“
▲/+” or “▼/-“
key again to select (1). 30 Min (2). 60 Min. (3).90 Min (4).120 Min (5).150 Min
(6).Off. To select 30 Min. the image will move left for one pixel for every 30 minutes, to select 60 Min, the
image will move left for one pixel for every 60 minutes, the other options are the same regulation.
ID
The ID function is only applicable for some specific models, if the model you brought has the ID function,
Please check the ID setup procedure on page 9.
Default
If you want to back to factory default, press “
▲/+” or “▼/-“
key to select “ Default”
“
and press “Enter” key to
activate “OK”
Exit
Press the “Menu” key and press “
▲/+” or “▼/-“
to select
“Exit” to exit the OSD menu.
Picture (PC/VGA Mode)
1. Press the “Menu” key on the buttons to call out the
OSD“Menu” . Press “
▲/+” or “▼/-“
to select
“Picture” Mode
and press “Menu” key again to select
the “Picture” option.
2. Various picture settings are available from the “Picture”
menu. Use“
▲/+” or “▼/-“
to select item that you want
to adjust and press “Menu” key again until grey bar
changes to blue color and press “
▲/+” or “▼/-“
increase or decrease the figure that you wish . Press
“Exit” key to return to menu and confirm the setting.
Press two times of “Exit” to exit the menu.
15
