H-Position
Use to change horizontal position of the picture. You may press “
▲/+” or “▼/-“
key to select “H-Position” and
press “
▲/+”
key to increase “Blue bar” to shift the picture to right or press
“▼/-“
to decrease “Blue bar” to shift
the picture to left.
V-Position
Use to change vertical position of the picture. You may press “
▲/+” or “▼/-“
key to select “V-Position” and
press “
▲/+”
key to increase “Blue bar” to shift the picture up or press
“▼/-“
to decrease “Blue bar” to shift the
picture down.
Image Ratio(PC/VGA Mode)
In order to meet different applications in video output, there are 2 image ratio to choose (1) 4:3 (2) 16:9
Press “
▲/+” or “▼/-“
key to select the ratio you want.
1. 4:3
The image fully fills up the 4:3 screen on both “Vertical”
and “ Horizontal” lines.
2. 16:9
This mode to make the format as 16:9 to support the
16:9 signal input from PC.
Image Optimize
Select the “ Image Optimize” for best image setting. Press “Menu” to enter “OK” mode. To select the Auto
Color,
The monitor will auto fine-tune the color as default.
Phase
Use phase to fine-tune the monitor to perfectly ADC clock phase synchronize to the video signal source
under RGB mode. Press “
▲/+” or “▼/-“
to increase/decrease the “Blue bar” to adjust the Phase.
Clock
Use Clock to fine-tune the monitor when phase value is wrong. Press “
▲/+” or “▼/-“
to increase/decrease the
“Blue bar” to adjust the Clock..
17
