4. Hardware
This chapter will guide you through the correct installation procedures for the LCD monitor.
4.1. Checking the Accessories Supplied
LCD monitor body x 1 pc
Desk Stand x 1 pc
AC power cord x 1 pc
Adaptor x 1 pc
D-Sub 15-pin cable (1.8 Meter) x 1 pc
Ø 3.5mm audio line (1.5 Meter) x 1 pc
User manual (CD) x 1 pc
Remote controller x 1 pc
Battery (AAA) x 2 pcs
Touch Panel Driver (CD) x 1 pc
5.
Buttons and Connections
5.1 Buttons
1
2
3
4
5
1
“Source/Exit”
1. To select the input signal source when the OSD menu is Off. The available signal source will show in the
following order: Video-1, S-Video, VGA , HDMI .
2. To exit the menu when you finish the setting.
2
”
▼
▼
▼
▼////
-
-
-
-
” :
To move the cursor downwards or to switch over the setting items or to decrease the figure of the setting
selected.
3
“ “ Power :
Press button to turn the power on and press again to turn the power off.
4
.
”
▲
▲
▲
▲/+
/+
/+
/+
”
:
To move the cursor upwards or to switch over the setting items or to increase the figure of the setting
Selected
5
“Menu/Enter” :
To enter the OSD menu or confirm the setting