4. Over Scan-1
The format is over scan mode to make the image
fill up the screen and cut about 3% on both
“Vertical” and “Horizontal” lines.
13
5. Over Scan-2
The format is another over scan mode to make
the image fill up the screen and cut about 6% on
both “Vertical” and “Horizontal” lines.
OSD Time
If you want the OSD Menu to stay longer on the screen, press “Menu/Enter” key and press “
▲/+” or “▼/-“
key
to select “OSD Time”, there are 4 time table to select (1) 30 Sec. (2) 60 Sec.(3). 90 Sec. (4) 180 Sec.
Sleep Time
The function will make the monitor in sleep mode to save the power when monitor is in standby mode. To
press “Menu/Enter” to enter the option and press
“
▲/+” or “▼/-“
key again to select (1). 30 Min (2). 60 Min.
(3).90 Min (4) Off. To select 30 Min that means the monitor will enter sleep mode when monitor is in standby
mode for more than 30 Min. The other time options are the same rule.
Source Lock
The function will stop the signal auto scan process and fix the signal source you preferred. To select “Source
lock” and press “Menu/Enter” and select “Yes” to activate the source lock function, select “No”
will close the source lock function.
Key Lock
The function is to prevent from the kid’s playing or mis-press to change the setting. Press “Menu/Enter” and
select “Yes” to activate the key lock function, select “No” will close the key lock function.
If you want to release the Key Lock function you can press “Menu/Enter” and “Source/Exit” key simultaneously.
Anti Burn-in
The function can prevent the LCD panel from burn-in when camera or DVR is always displaying the same
picture source at all times. Press “
▲/+” or “▼/-“
key to select “ Anti Burn-in” and press “Menu/Enter” to enter the
option and press
“
▲/+” or “▼/-“
key again to select (1). 15 Min (2). 30 Min. (3).60 Min (4).90 Min (6).Off. To
select 30 Min. the image will move left for one pixel for every 30 minutes, to select 60 Min, the image will move
left for one pixel for every 60 minutes, the other options are the same regulation.
3D NR
To use 3D NR to reduce the noise level and improve the video quality. There are four levels to select (1) High