Exland EL-17MC2RFTC, User Manual, Page: 17 / 24

(2) Medium (3) Low (4) Off. Press “Menu/Enter” and press “
▲/+” or “▼/-“
key to select the level.
ID Controller
The ID function is only applicable for some specific models, if the model you brought has the ID function,
Please check the ID setup procedure on page 9.
Default
If you want to back to factory default, press Menu/Enter and then press “
▲/+” or “▼/-“
key to select “ Default”
“ .
P ress “Menu/Enter” key and press to “
▲/+” or “▼/-“
key activate “Yes”
14
Multi Screen (Video/HDMI Mode)
Press the “Menu/Enter” key on the buttons to call out the
OSD Menu . Press “
▲/+” or “▼/-“
to select “Multi
Screen” and press “Menu/Enter” key again to select the
“Multi Screen” option.
Multi-Screen
There are 4 multi screen modes to select (1) PIP (2) PBP (3) PBP 4:3 (3) Off . You may press “Menu/Enter”
and press “
▲/+” or “▼/-“
to select mode you want. “PIP” is Picture In Picture and “PBP” is Picture By Picture.
The PIP or PBP doesn’t allow the condition of Video on Video .
Main Screen
Press the “Menu/Enter” key to enter the Main Screen and press “
▲/+” or “▼/-“
to select VGA as the main
screen . When the main screen is in VGA mode, the sub screen can be Video-1/ S-Video/ HDMI. But when
select Video-1/ S-Video/ HDMI as main screen, the sub screen will be VGA only.
Sub Screen
Press the “Menu/Enter” key to enter the Sub Screen and press “
▲/+” or “▼/-“
to select VGA as the sub-screen .
When the main screen is in VGA mode, the sub screen can be Video-1/ S-Video/ HDMI.
Sub Size
Press the “Menu/Enter” key to enter the Sub Size and press “
▲/+” or “▼/-“
to select the size of sub-screen .
There are 3 size to select (1).Small (2).Medium (3).Large
Sub Position
Press the “Menu/Enter” key to enter the Sub Position and press “
▲/+” or “▼/-“
to select 1~5 as the position of
sub-screen 1 : Top left 2: Top right 3: Bottom right 4: Bottom left 5: Central
Sound Source
To select the sound source is from Main Screen or Sub Screen. Press “
▲/+” or “▼/-“
to select Main Screen or
Sub Screen
Swap
Press “
▲/+” or “▼/-“
key to enter the Swat . Press “Menu/Enter” and Press “
▲/+” or “▼/-“
to activate “Yes” to