swap the main screen and sub-screen
Picture (VGA Mode)
1. Press the “Menu/Enter” key on the buttons to call out
the OSD Menu . Press “
▲/+” or “▼/-“
to select
“Picture” mode and press “Menu/Enter” key again to
access into item option . Press “
▲/+” or “▼/-“
to
select item you want to adjust.
2. Various picture settings are available from the “Picture”
menu. Use“
▲/+” or “▼/-“
to select item that you want
to adjust and press “Menu/Enter” key again until yellow
bar changes to pink bar and press “
▲/+” or “▼/-“
increase or decrease the figure that you wish . Press
“Source/Exit” key to return to menu and confirm the
setting. Press two times of “Source/Exit” to exit all the menu.
15
Contrast
Press “
▲/+” or “▼/-“
to increase/decrease the “Pink bar” to adjust contrast. Increasing contrast will make white
area of the video picture brighter. Contrast works in conjunction with “Brightness”.
Brightness
Press“
▲/+” or “▼/-“
to increase/decrease the “Pink bar” to adjust brightness. Adjusting brightness to enhance
the level of dark area in the video picture such as night scenes and shadow scenes. Increasing brightness will
make dark areas more visible.
Backlight
Press “
▲/+” or “▼/-“
to select “ High / Medium / Low / Min “ to adjust backlight. “High” level will make the
backlight in most light, the “Min” will minimize the backlight.
Color Temp.
Select the Color Temp.” for white balance. Press “Menu/Enter” to enter color temp. option. There are 4
settings to choose from (1)Standard (2). Warm (3).Cold (4) User. To select “User” you may press “
▲/+” or “▼/-
“
to increase/decrease the “Pink bar” to adjust color of Red, Green and Blue.
Clock
Use Clock to fine-tune the monitor when phase value is wrong. Press “Menu/Enter” and press “
▲/+” or “▼/-“
to
increase/decrease the “Pink bar” to adjust the Clock.
Phase
Use phase to fine-tune the monitor to perfectly ADC clock phase synchronize to the video signal source under
RGB mode. Press “Menu/Enter” and press “
▲/+” or “▼/-“
to increase/decrease the “Pink bar” to adjust the
Phase.
H-Position
Use to change horizontal position of the picture. You may press “Menu/Enter” and press “
▲/+” or “▼/-“
key to
select “H-Position” . Press “
▲/+”
key to increase “Pink bar” to shift the picture to right or press
“▼/-“
to
decrease “Pink bar” to shift the picture to left.
V-Position
Use to change vertical position of the picture. You may press “Menu/Enter” and press “
▲/+” or “▼/-“
key to