6. ID Remote Controller
. POWER switch.
Press to turn ON or turn OFF the LCD Monitor.
.
VIDEO SIGNAL Selection:
Press the “AV1” , “S-VIDEO”, “D-SUB”, “HDMI” button
to enter the selected video source or press the “SOURCE”
button to have the cycle video selection.
Remark: “AV2” is invalid for this model.
. PIP Hot Key:
Press PIP button to enter “PIP” setup.
.
PBP Hot Key
:
Press PBP button to enter the PBP setup
.
SWAP Hot Key
:
Press SWAP button to exchange the main and sub screen.
.
VOL:
Press “+” to increase volume and press “-“ to decrease volume.
. DEFAULT :
Press “Default” to clear all the setting and return to factory default.
. MUTE and PAUSE :
Press “MUTE” to mute the sound and press “PAUSE” to pause
the video.
.
OSD setup:
a. Press the “MENU” to enter the OSD menu and press “ENTER”
to access into item option, press “
▲
UP” or “
▼
DOWN” to
select setting item and press “ENTER” again until Yellow bar
changes to Pink bar. Press “
+
” to increase or “
- ”
to
decrease the “pink bar” to adjust the setting.
b. Press the “EXIT” to exit the menu and confirm the setting.
c. Press the “ENTER” to confirm the ID number setting.
9