![background image](http://html.mh-extra.com/html/exibel/bdx610/bdx610_manual_2450339010.webp)
10
En
gl
is
h
4. Once the devices have found each other, the stereo will appear as “BDX610” on
the Bluetooth device.
5. Select
BDX610
on the list. If you are required to enter a PIN code, enter
0000
(four zeros). Certain devices may also require you to approve the connection.
6. Once the connection has been successful “BT CONNECT” will appear on
the display of the stereo.
7. Start playback on the Bluetooth device.
8. Adjust the volume both on the device and stereo to the desired volume level.
Playing MP3 files from a USB memory
1. Plug a USB flash drive into the stereo
(12). Make sure to insert the USB flash
drive the right way round to ensure that the connectors are not damaged. Always
push the USB flash drive straight in without twisting or bending it.
2. Select audio source: Press [ SOURCE ] repeatedly until “USB” is shown on
the display (if “NO USB” is displayed, check that the USB flash drive has been
inserted correctly).
3. When the USB stick has been read, the number of files and tracks will be shown
on the display. Thereafter, the first track will be played automatically. Information
about the track being played is shown on the display.
4. Press [ FOLD- ] or [ FOLD+ ] the required number of times to select a folder for playback.
5. Press [ |
◄◄
] or [
►►
| ] repeatedly to change track in the folder. Press [ -10 ] or
[ +10 ] to skip forwards or backwards 10 tracks in one go.
6. Hold down [ |
◄◄
] or [
►►
| ] while a track is playing to search backwards or
forwards in the track.
7. Press [
►
|| ] once to pause playback. Press the button again to resume playback.
8. Press [
■
] to stop playback. The number of folders and total number of tracks on
the USB flash drive will be shown on the display.
Playback list
You can save up to 99 MP3 tracks on a playback list and choose in which order they
are to be played.
1. Make sure that playback of the USB flash drive has been stopped by pressing [
■
].
2. Press [ PRG/MEMORY ] once to enter programming mode. “PRG” will appear on
the display and the first slot of the playback list will flash.
3. Select the track that you wish to save in the slot by pressing [ |
◄◄
] or [
►►
| ]
the required number of times. Use [ FOLD- ] or [ FOLD+ ] to select a folder. Confirm
by pressing [ PRG/MEMORY ]. The next slot in the playback list will start to flash.
4. Repeat step 3 above and save all the tracks in the order you’d like them to be played.