![background image](http://html.mh-extra.com/html/exibel/bdx610/bdx610_manual_2450339009.webp)
9
En
gl
is
h
Programming stations in the memory
Save the desired radio station to a preset slot by holding down [ PRG/MEMORY ]
for 3 seconds on the remote control. Thereafter, select a preset slot using [ TUN- ]
or [ TUN+ ] and save by pressing [ ENTER ]. The display will show “STORED”.
Listening to a preset station
Press [ PRG ]. Then press [ TUN- ] or [ TUN+ ] repeatedly to choose a station from
the list of preset stations. Press [ ENTER ] to listen to the selected station.
Press [ INFO ] on the remote control repeatedly to display any DAB information
transmitted by the station.
DAB radio settings
1. Press [ MENU ] on the remote control to go to the menu for the DAB radio settings.
2. Press [ TUN+ ] or [ TUN- ] to browse the menu. Press [ ENTER ] to confirm.
The following menus will appear:
•
Full Scan
: Automatic scan for DAB radio stations.
•
Manual
: Manual tuning into DAB radio stations. Press [ TUN+ ] or [ TUN- ]
repeatedly to choose the desired frequency/station. Press [ ENTER ] to listen to
the selected station.
•
DRC
(Dynamic Range Control): Reduces the difference in volume between
the various stations. Press [ TUN+ ] or [ TUN- ] the required number of times to
select either
HIGH
,
LOW
or
OFF
. Press [ ENTER ] to confirm.
•
Prune
: Remove unavailable stations from the list. Press [ TUN+ ] or [ TUN- ] until “Y”
flashes on the display. Press [ ENTER ] to confirm.
•
System
: Press [ TUN+ ] or [ TUN- ] to select either
RESET
or
SW VER
.
Press [ ENTER ] to confirm.
-
RESET
: Reset the stereo to the factory settings.
-
SW VER
: Shows the current software version.
Connecting an external Bluetooth device
Connecting a Bluetooth device to the stereo
1. Select audio source: Press [ BT ] on the remote control or
[ SOURCE ] repeatedly on the remote control or stereo until
“BLUETOOTH” is shown on the display.
2. Make sure that no other Bluetooth device is connected to
the stereo. “NO BT” will appear on the display.
3. Activate Bluetooth mode on the device that you want to
connect. Look for the stereo on the list of detected devices
on Bluetooth device (refer to the instruction manual of
the device in question).