![background image](http://html.mh-extra.com/html/exibel/bdx610/bdx610_manual_2450339007.webp)
7
En
gl
is
h
Playback list
Up to 20 CD tracks can be saved on a playback list and you can choose in which
order they are to be played.
1. Make sure that playback of the CD has been stopped by pressing [
■
].
2. Press [ PRG/MEMORY ] once to enter programming mode. “PRG” will appear on
the display and the first slot of the playback list will flash.
3. Select the track that you wish to save in the slot by pressing [ |
◄◄
] or [
►►
| ]
the required number of times. Confirm by pressing [ PRG/MEMORY ]. The next slot
in the playback list will start to flash.
4. Repeat step 3 above and save all the tracks in the order you’d like them to be played.
5. Finalise the programming and start playback by pressing [
►
||/ENTER ].
6. To interrupt playback of the playback list, press [
■
] repeatedly until “PRG”
disappears from the display.
Note:
The playback list is erased from the memory when you select another audio
source or switch the stereo system off.
FM radio
The stereo system radio receiver supports both analogue (FM) and digital (DAB/DAB+)
radio transmissions.
Tuning into a radio station
Select audio source: Press [ DAB/FM ] or [ SOURCE ] repeatedly until “FM” is shown on
the display. Thereafter the display will show the chosen station/frequency.
1. Manual tuning: Press [ TUN- ] or [ TUN+ ] to change to a lower or higher frequency.
2. Automatic search: Hold down [ TUN- ] or [ TUN+ ] on the remote control or
[ |
◄◄
] or [
►►
| ] on the stereo to search automatically for the next radio station.
The search stops when a station has been found.
Programming stations in the memory
• Automatic station search and save: Press [
■
/AUTO TUNE ] on the remote control
or stereo to start the stereo searching for and saving stations automatically.
The stations with the strongest signals are programmed into the 20 preset slots.
To interrupt the station search, press [
■
/AUTO TUNE ] once again.
• Saving preset stations manually: Save the desired radio station to a preset slot by
holding down [ PRG/MEMORY ] for 3 seconds on the remote control. Thereafter,
select a preset slot using [ TUN- ] or [ TUN+ ] and save by pressing [ ENTER ].
The display will show “STORED”.