8
En
gl
is
h
Listening to a preset station
• Press [ PRG ]. Then press [ TUN- ] or [ TUN+ ] repeatedly to choose a station from
the list of preset stations. Press [ ENTER ] to listen to the selected station.
• You can even move up or down in the station list by pressing [ |
◄◄
] or [
►►
| ]
repeatedly.
Display RDS information (Radio Data System)
If the radio station sends out RDS information, the letters “RDS” will be displayed.
Press [ INFO ] on the remote control repeatedly to display any RDS information
transmitted by the station.
The following information can be displayed:
• Station name
• Radio text
• Programme type
• Preset slot and frequency
• Signal type (mono/stereo)
• Clock
• Date
FM radio settings
1. Press [ MENU ] on the remote control to go to the menu for the FM radio settings.
2. Press [ TUN+ ] or [ TUN- ] to browse the menu. Press [ ENTER ] to confirm.
The following menus will appear:
•
Scan
: Choose the sensitivity for scanning for FM stations. Press [ TUN+ ] or [ TUN- ]
to choose
DX
(high sensitivity) or
LOCAL
(low sensitivity). Press [ ENTER ] to confirm.
•
Audio
: Select whether you wish to receive stereo audio or if you want to receive
transmissions in mono. In poor reception conditions mono can improve the sound
quality. Press [ TUN+ ] or [ TUN- ] to select either
STEREO
or
MONO
.
Press [ ENTER ] to confirm.
•
System
: Press [ TUN+ ] or [ TUN- ] to select either
RESET
or
SW VER
.
Press [ ENTER ] to confirm.
-
RESET
: Reset the stereo to the factory settings.
-
SW VER
: Shows the current software version.
DAB radio
Select audio source: Press [ DAB/FM ] or [ SOURCE ] repeatedly until “DAB” is shown
on the display. If no DAB-stations are programmed as presets, a new scan will begin
automatically.
Press [ TUN- ] or [ TUN+ ] to choose a station from the list of preset stations.
