SSE232-LE User’s Manual
Exemys
2.3 Ethernet
Connection
RJ45 connector is used for the Ethernet connection. The Ethernet connection is essential for
SSE232-LE to operate. It can be connected to a Hub or Switch with an standard network cable.
2.3.1 Connection through a Hub or Switch
A UTP network cable is used to connect SSE232-LE to the Ethernet through a Hub or Switch.
RX + (1)
RX - (2)
TX + (3)
TX - (6)
SSE232-LE
RX + (1)
RX - (2)
TX + (3)
TX - (6)
HUB
Figure 5 - Scheme of connection without crossover network cable
www.exemys.com Rev.
1.0.3
Page9
