44-PIECE AIR TOOL KIT
I
H4
I4
J4
F/G
22
23
24
7. Connect air supply hose to the male plug.
(See Figure 24)
8. Set the working pressure at 90psi/6.3bar for
best tool performance.
NOTE:
Working pressure refers to the
air line pressure set to tool when tool
is under working conditions.
5. Insert a grinding stone (F/G) into the
collet (J4). (See Figure 22)
NOTE:
Two collets of different
sizes (1/4", 1/8") are provided.
Select whichever fits the shank of the
stone you have chosen.
6. Tighten the collet jacket (I4) clockwise with large
wrench while holding the small wrench on the
flats of the collet holder (H4). Make sure that
the grinding stone is installed securely and
tightly. (See Figure 23)
WARNING! Only use
grinding
accessories
that have a RPM and
Torque rating equal to or greater than
the tool itself.
18
