EXCISION PGM 280, Operation Manual

Page: 3 / 28

3
WARRANTY CONDITIONS
The machine is under the warranty of Excision Pty Ptd. For a period of 2 years for mechanical
parts, 1 year for electric and electronic parts from the date of purchase. This warranty is subject to
all of the terms and conditions listed below:
1. This warranty is valid only if the Warranty Registration Form is filled in and returned to
the manufacturer or its authorized dealer within two months after the date of purchase.
2. The obligation of the manufacturer under this warranty shall be limited to repairing or
replacing components which proves defective and which our examination shall disclose to
our satisfaction to be defective.
3. Defects due to improper operation, misuse, neglect, alteration, irregular voltage conditions,
inadequate wiring, improper installation (all electrical and electronic components, all
electrical motors etc.) and due to accidents or any damage caused by transportation, flood,
fire, natural disasters, theft are not included in this warranty and are strictly the
responsibility of the purchaser.
4. Any part returned to Excision or its authorized dealer under the terms of this warranty shall
be on the basis of transportation charges prepaid by the customer and must be
accompanied by a record of the machine model code and serial number.
5. This warranty does not apply to the following components; band saw blade, blade pressure
pads or brackets and blade guide bearings because of being consumables .
6. Manufacturer and authorized dealer cannot be blamed within maximum repair period for
the material or moral damage. Apart from that act the period as Warranty Conditions and
there will not be done any retroactive requirement.
Excision Pty Ltd
Dealer :