12
X-Cite
®
200DC User Guide
035-00446R rev. 4
5.1.6 Locate the 4-pin Intelli-Lamp sensor connector at the rear of the lamp module
and connect it to its mate located on the top of the lamp-housing wall.
Tip:
The Intelli-Lamp connector will only attach in the correct orientation. If you
are having difficulty attaching the connector, try rotating it by 180º.
Note:
If the Intelli- Lamp connector is not installed correctly, the lamp will not
strike and the “
bulb
” message will display when POWER is turned on to
the unit.
Figure 5 Lamp connections
5.1.7 Locate power connector with two leads and connect it to its mate located on the
side of the lamp-housing wall.
CENTER BAR
AND LEAD
WITHIN CUT
-
OUT
POWER
CONNECTOR
INTELLI
-
LAMP
CONNECTOR
Summary of Contents for X-Cite 200DC
Page 1: ...X Cite 200DC User Guide...
