Excelitas Technologies X-Cite 200DC, User Manual

Page: 23 / 50

19
X-Cite
®
200DC User Guide
035-00446R rev. 4
6.5 Display Format Reference
6.5.1 The formatting used on the display board is used to identify the unit of
measurement or phase of operation.
Display
Format
Definition Description
XXXX. Lamp Hours
Displays the
“hours of use” accumulated by the
lamp
Flashing:
“
XXXX
”
Warming Up
The lamp is warming up. Warm up time is
approximately 4 minutes
6.6 Adjusting Light Output
Figure 8 Iris Adjustment Dial Layout
6.6.1 To adjust light intensity, use the Iris Adjustment Dial and set to desired level by
turning. Clockwise to increase light intensity and counter-clockwise to decrease
light intensity.
6.6.2 There are no detent stops, motion is smooth starting from 0% and ending at
100%. 0, 12.5, 25, 50, 100% are marked on the fascia around the dial for
reference (ref.
Figure 8 )
6.6.3 Note that as the lamp ages, absolute power at a given setting will decrease.
Adjust the intensity as necessary. If monitoring absolute value of lamp output is
desired, refer to
section 6.8 or contact Excelitas Technologies about purchasing
an X-Cite
®
Optical Power Measurement System (OPMS).