background image

 
 
 

43 

X-Cite

®

 200DC User Guide 

035-00446R rev. 4 

 

11    Regulatory 

11.1 Product Safety and Electromagnetic Compatibility: 

 

The X-Cite 200DC has been tested and found to comply with product safety and 
electromagnetic compatibility requirements.  For a complete list of tests and for 
certification details, please contact your X-Cite representative or visit 

http://www.excelitas.com/Pages/Product/X-Cite-200DC.aspx

.   

 
CE Marking: 

Council Directive 2014/35/EU   

Low Voltage Directive 

Council Directive 2014/30/EU   

EMC Directive 

Council Directive 2012/19/EU   

WEEE Directive 

Council Directive 2011/65/EU

   

RoHS 

 

FCC Class A Digital Device or Peripheral - Information to User 

 

NOTE

 

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own expense.

 

 

WARNING 

Changes or modifications not expressly approved by Excelitas Technologies could void 
the user’s authority to operate the equipment. 
 
 

WEEE Directive (2012/19/EU) 

                                           

 

The symbol above indicates that this product should not be disposed of along with 
municipal waste, that the product should be collected separately, and that a separate 
collection system exists for all products that contain this symbol within member states of 
the European Union. 

  The equipment that you bought has required the extraction and use of natural 

resources for its production. It may contain hazardous substances that could 
impact health and the environment. 

Summary of Contents for X-Cite 200DC



















































Reviews: