Excelitas Technologies X-Cite 200DC, User Manual

Page: 5 / 50

1
X-Cite
®
200DC User Guide
035-00446R rev. 4
1 X-Cite
®
200DC Message Reference
Display
Message
Definition Description
XXXX. Lamp Hours
Displays the “hours of use” accumulated by the
lamp
Flashing:
“
XXXX
”
Warming Up
The lamp is warming up. Warm up time is
approximately 4 minutes ref
section 6.1
bulb Lamp Error
Lamp installed incorrectly /Lamp did not strike.
See
section 8.3
cool Lamp is too hot to strike
The lamp will automatically strike when it has
cooled to the optimum striking temperature.
See
section 8.3
Alternating:
old / bulb
Old Lamp
The lamp has accumulated over 2500 hours.
Lamp may be near end of life.
Alternating:
end / bulb
New Lamp Required
The lamp has reached end of life. The lamp
will not strike.
SFI
Shutter Failure
The shutter has failed to return to home
position. Unit should be restarted. If the error
repeats,
contact Tech Support .
E1
Lamp temperature is too high
Check ventilation filters and outlets to ensure
that no blockage exists. Restart unit and if
problem persists replace lamp. If problem
continues
contact Tech Support
E4
Internal hardware failure
Restart unit, if problem persists contact Tech
Support
E5
Failure to communicate with
Intelli-Lamp
Check Intelli-Lamp connection and restart unit.
If problem persists try another lamp, if problem
still persist
contact Tech Support .
E6
Lamp self extinguished
Let system cool and restart lamp. If it goes out
again, replace lamp. If new lamp continues to
self-extinguish,
contact Tech Support
E7
Internal system error
Restart unit, if problem persists contact Tech
Support
See Section 8 for troubleshooting.