11
X-Cite
®
120PC Q User Guide
035-00328R rev. 4
4.1.6 Slide the lamp all the way in so that both leading edges of the lamp ceramic
mount are in the groove of the lamp bracket. The middle of the lamp will snap
into the spring clamp. Close the lamp bracket arm. Reference Figure 5
4.1.7 Locate the 4-pin Intelli-Lamp sensor connector (multi-coloured wiring harness) at
the rear of the lamp module and connect it to its mate located on the lamp-
housing wall. Reference Figure 6.
Figure 6 Intelli-Lamp Connection
Tip:
The Intelli-lamp connector will only attach in the correct orientation. If you
are having difficulty attaching the connector, try rotating it by 180º