■How to Set-Up Sensor Pad
CAUTION
●Attaching the terminal upside down will cause an error.
After connection, make sure LED is blinking.
■How to Apply to the Diaper
1. Attach the sensor pad to the diaper using double-faced tape.
Attach the grey side of the pad to the diaper.
Attaching the wrong side may cause an error.
Change double-faced tape every day.
Pre-used tape may cause an error.
3. Wrap with the center cover.
2. Wrap the diaper with its side cover and fasten with Velcro
fastener. Fold back the transmitter on the cover. You can also
secure the transmitter with a clip.
CAUTION
If the string touches skin, the sensor may not work properly.
Keep the sensor string from
touching skin.
Attach the sensor side of the pad
to the diaper.
Make sure the sensor is well
adhered to the diaper.
■Storage Caution
●When storing, detach the sensor pad from the transmitter, or remove batteries.
Leaving the rear side of the sensor pad on a metal surface may cause malfunction.
When not in use, make sure that the rear side of the pad does not contact a metal surface.
Insert the plug into the jack all the way until the
plug latches into the transmitter's receptor.
LED will blink when it is set correctly
CAUTION
CAUTION
CAUTION
