Is it wet near the snap fastener?
If yes, use after dry the hook.
Use slow dry method.
Any suspicion of a short-circuited?
You need to replace the sensor
Is the tape wet?
If yes, change the sensor tape
CPU is out of control?
Turn it off and remove the battery.
Insert the battery after 10 seconds and turn it on.
■The sensor comes on when the diaper is actuary dry
●Transmitter problem?
●Sensor tape problem?
●Receiver problem?
The sensor terminal on the plug is dirty.
Use after cleaning.
P-10
Is the sensor pad wet?
●Sensor pad problem?
Is the sensor pad broken?
If yes, change the sensor pad.
If yes, use after drying the sensor pad.
Use slow dry method.
Is the sensor pad attached to the skin?
If yes, attach the sensor pad out side of the diaper.
Using the sensor pad over one month?
If yes, change the sensor pad.
Storing with the battery and sensor in?
Store the transmitter after removing the battery and
sensor
Sensor pad is broken?
Change the sensor pad.
Check where is wet.
Apply the sensor pad where gets wet.
●Sensor Pad Problem?
Sensor pad is apart from the diaper.
Fix the
side of sensor pad on to the outer
surface of the diaper firmly with double-faced tape.
Using the sensor pad over one month?
Change the sensor pad.
Is it wet near the snap fastener of tape
adapter?
If yes, use after dry the tape adapter.
Use slow dry method.
●Sensor tape adapter problem?
