background image

5

Controller & Transmitter Overview (cont’d)

L

OCK

button

T

RUNK

button

U

NLOCK

button

S

TART

button

Range

boost

Part number:

 

1513-03 E

Call your dealer or visit www.caralarm.com to 

order replacement transmitters.

Transmitter battery replacement:

Remove the small screw from the  lower 

back case, and separate the transmitter 

halves� Replace the battery and reas-

semble the transmitter case�

Battery Types:

 

1513-03E - CR2025 (2 required)

THE 1-WAY TRANSMITTER

Controller & Transmitter Functions

LOCK / ARM: 

 Press and release the LOCK button�

•  THE SIREN WILL CHIRP & THE PARKING LIGHTS WILL 

FLASH ONCE�

•  UPON RECEIVING CONFIRMATION FROM YOUR 

SYSTEM, THE CONTROLLER WILL PLAY THE LOCK/ARM 

ANIMATION AND BEEP ONCE 

 

NOTE: PRESSING LOCK TWICE IN 5 SECONDS  STARTS 

THE PARKING TIMER. THE CLOCK WILL CHANGE TO 

0:00 AND START COUNTING IN MINUTES & HOURS. 

 

(1-WAY TRANSMITTER: PRESS THE LOCK BUTTON)

UNLOCK / DISARM: 

 Press and release the UNLOCK button�

•  THE SIREN WILL CHIRP TWICE & THE PARKING 

LIGHTS WILL FLASH TWICE THEN ILLUMINATE FOR 30 

SECONDS�

•  UPON RECEIVING CONFIRMATION FROM YOUR 

SYSTEM, THE CONTROLLER WILL PLAY THE UNLOCK/

DISARM ANIMATION AND BEEP TWICE� 

 

(1-WAY TRANSMITTER: PRESS THE UNLOCK BUTTON)

NOTE: The 2-way Controller is shipped from the factory in POWER OFF mode. 

If you connect the charger before powering it, perform POWER OFF, then 

POWER ON again.

POWER ON: Press and hold the “P” button for at least 1 second

POWER OFF: Press the “P” and START buttons for at least 1 second

Summary of Contents for AL-2075-3DB-L





























Reviews: