12
Using The Valet Switch
VALET MODE
Valet mode completely disables all security & remote start functions� Keyless entry
is still operable� To enter valet mode, perform the following steps:
STEP 1 -
Disarm the system by remote or by performing an emergency override�
STEP 2 -
Press and hold the valet switch for 2 seconds� The system will chirp once
and the status light will turn on�
EXITING VALET MODE
- Press and release the valet switch once� The status light
will turn off�
EMERGENCY OVERRIDE
If you were to lose or break your controller, you’d need to perform an emergency
override to disarm the system and use your vehicle� To do so, use the following steps:
STEP 1 -
Enter the vehicle (the alarm should sound)�
STEP 2 -
Turn the ignition key to the “ON” position�
STEP 3 -
Press the valet switch (located in the window-mount antenna) once�
NOTE: Enter your SecureCode at this time if programmed via user feature #13
STEP 4 -
Turn the ignition key “OFF”�
WHEN THE SYSTEM TRIGGERS
It will sound the siren/horn and flash the parking lights for 30 seconds (selectable).
The controller will also alert you indicating which zone is violated (if in range of the
system)� When disarming the system after a trigger event, the siren/horn will chirp
and the lights will flash 4 times instead of the standard 2 times.
LOCK ON TRIGGER:
If a door is opened when the system is triggered, it will wait
until the door is closed again, then lock the doors�
STORM SAFE MODE:
When the system is triggered, pressing the UNLOCK button
will stop the alarm from sounding but will leave the doors locked� This function is use-
ful if you have a false triggering situation due to violent weather�
ZONE VIOLATION RECALL:
The system is capable of telling you which zones were
triggered last. The system’s status light will flash to indicate which zone was triggered
(see the next page). This occurs during the alarm cycle AND after disarming. The
system will store the last triggered zone until the vehicle’s ignition key is turned on.
NUISANCE PREVENTION:
If the sensor prewarns 5 times within 15 minutes, it will
bypass the zone for the remainder of the 15 minutes before rearming the pre-warn
zone. If a full trigger zone is left open, the system will trigger a total of 3 times before
bypassing the zone. Once the zone is closed again, it will re-arm that zone.
PRE-WARN DETECTION
This system’s impact sensor is designed, in addition to detecting a full impact, to
warn away potential violators when it detects a light impact to the vehicle� The system
will respond by chirping the siren/horn 3 times and locking the doors� This is very use-
ful when an intruder attempts to unlock the door with “slim jim” types of devices�
Security System Features (cont’d)
