Page | 19
Switching Between Wireless and Wired Network Connection
Only one network connection can be active at any time. Use the
Start/Restart
buttons to switch
between wired and wireless network connection.
The PlayPoint Mark II may restart to activate the new network settings.
Remote control apps also may have to be restarted after changing the network connection.
Network Screen for Models without Wi-Fi
If you've purchased a PlayPoint Mark II model without Wi-Fi support, the simplified Network Screen will
provide information about the network status and the IP address assigned to your PlayPoint Mark II.
Multi-room Configuration
Each PlayPoint Mark II device on your home network must have a unique name. Use the
Select
PlayPoint Name
screen to assign different host names to your PlayPoint Mark II players.
1.
Navigate to the
Select PlayPoint Name
screen. The current host name will be highlighted.
2.
Tap on one of the six pre-configured host names.
3.
The PlayPoint Mark II will shut-down and restart.
4.
Remote control apps must be reconfigured to use the new PlayPoint Mark II host name.
