ExtendAir® eMIMO™ Digital Microwave Radios
208398-002
11
2014-01-07
Connections
Ensure that power and grounding are properly wired and installed before making
additional connections. The included grounding hardware allows connection of a
grounding lug to the M5 receptacle near the lower-left corner of the radio. Place
the wave washer next to the head of the screw. Place flat washers on both sides
of the grounding lug. Another grounding connection is available on the power
injector.
After establishing the radio link, connect the Ethernet services matching
configurations made in the Exalt GUI. Use a ping test to verify connectivity
across Ethernet.
Indicators
The PoE/ETH1 connector inside the radios have LEDs to indicate status:
The bottom LED is solid green when power is properly applied.
The top LED is solid when an Ethernet link is established, and blinks when
Ethernet traffic is present.
Register the Product
Products registered within 90 days of purchase receive 2 full years of warranty
coverage for no extra charge. Unregistered products and products registered
after the 90-day period, only receive a 1-year warranty. Register the product
according to the instructions on the provided registration card. See the I&M
Guide for the full warranty statement.
For More Information
Refer to the I&M Guide, which can be downloaded from the radio or from the
Internet at:
http://login.exaltcom.com
New users must register before logging into the support section of the Exalt
website.
For post-sales support, contact Exalt Customer Care at:
Phone: (408) 688-0202
Toll-Free (USA): (877) EXALT-01 (392-5801)
Support email:
Live support is provided from 7am to 4pm Pacific, Monday through Friday
except designated holidays. Extended-hour support available, sold separately.
Sales email:
Exalt Communications, Inc.
254 E. Hacienda Ave.
Campbell, CA 95008 USA
(408) 688-0200
© 2013 Exalt Communications, Inc. All rights reserved.
