eXact PipeCut 220 INOX Series, Operating Instructions Manual

Page: 18 / 20

Operation English
17
Plastic parts
Clean the plastic parts with a soft rag. Use only mild
detergents. Do not use solvents or other strong
detergents as they may damage the plastic parts and
painted surfaces
Power cable
Check the condition of the power cable regularly. If the
replacement of the supply cord is necessary, this has
to be done by the manufacturer or his agent in order to
avoid a safety hazard.
Correct use and regular servicing and cleaning will
ensure the reliable operation of the pipe saw.
Environment
Separate collection. This product must not be disposed
with normal household waste. When your Exact
PipeCut machine is worn out, do not
dispose it with normal household waste. This product
must be recycled separately. Separate recycling of
used products and packaging support recycling and
recovery of materials. Reusing recycled materials helps
preventing the pollution of the environment. According
to local regulations it is possible to deliver household
appliances to municipal rubbish depositories or to the
dealer when purchasing a new product.
Guarantee
Warranty terms valid from 01.01.2018.
If the Exact PipeCut saw becomes unusable due to
material or manufacturing defects within the Warranty
Term, at our discretion we will repair the Exact PipeCut
Saw or supply an entirely new or factory reconditioned
Exact PipeCut Saw at no charge.
The Exact Tools Warranty Term is for 12 months from
date of purchase.
The Warranty is only valid if:
1.) Copy of a dated purchase receipt is returned to the
Authorized Warranty Repair Center or has been
uploaded to our website at the time of warranty
registration.
2.) The Exact PipeCut Saw has not been misused.
3.) No attempt has been made by non-approved
persons to repair the saw.
4.) The Exact PipeCut Saw has been used in
accordance with the operating, safety, and servicing
instructions provide in these instructions.
5.) The Exact PipeCut Saw has been delivered to an
Authorized Warranty Repair Center within the
warranty period.
NOTICE! The Exact PipeCut Saw is to be shipped to
the Authorized Warranty Repair Center freight
prepaid. If the Exact PipeCut Saw is repaired under
Warranty, the return shipment will be made freight
prepaid.
CAUTION!
The following items or services are excluded for
Warranty claims:
- Saw blades
- Carbon brushes
- Blade or attachment flange
- Blade attachment nut or screw
- Normal wear
- Failures caused by misuse or accident
- Water, fire or physical damage
- Cables
- Adjustment of eccentric adjustment wheel
- If a wrong type of generator has been used as
power source.
Exact Pipe Cut operation tips
Diamond blades can only be used for cutting cast or
ductile iron pipes. This pipe material is not
recommended to cut using to a blade of any other type
Clean the inside of the blade guards after cutting
plastic pipes.
Smaller pipes are easier to cut by turning the pipe
manually either on the table or on the floor.
CAUTION
! Turn the pipe towards yourself when you do
it manually. Don't turn the pipe too fast.
Check the condition of the blade regularly.
The cutting process is divided into two stages: first you
need to cut through the pipe wall and then cut around
the pipe.
Do not overload the saw while working without
interruption. The pipecut will overheat and metal parts
can become very hot. In this case, the motor, the
gearbox and the blade may become damaged.
Maintain a uniform feed rate. This increases the
lifespan of the blade. For example, a steel pipe with
an outer diameter of 170 mm (6') and wall thickness
of 5 mm (1/5'), the cutting time-is15-20 seconds.
Accordingly cast iron pipe with an outer diameter of
4' (110 mm) and wall thickness of 1/6' (4 mm), the
cutting time is 20 – 25 seconds.
When not cutting, keep the motor unit in the up
position. Never attach the tool on the pipe with motor
unit in locked down / cutting position.