eXact PipeCut 220 INOX Series, Operating Instructions Manual

Page: 20 / 20

Cutting depths English
Factors influencing blade lifespan:
Pipe material
Blade suitability for the pipe material
Correct motor speed setting
Pipe wall thickness
Feed rate
Smoothness of the pipe
General user knowledge
Cleanliness of the pipe
Corrosion on pipe
Weld seam on the pipe
Blade speed
Factors influencing straightness of cutting:
Blade condition
Pipe wall thickness
Feed rate
Smoothness of feed
General user knowledge
Cleanliness of the pipe
Pipe circumference
Too loose or tight gripping device
Too tight blade
Maximum recommended pipe wall thicknesses of different materials, which can
be cut by Exact 220 INOX Series machine
220 INOX Series
Stainless steel pipes Max.pipe wall thickness 12,5 mm / 0.5”
ATTENTION! Do not cut pipes with thicker than the above mentioned wall thickness.
ATTENTION!
Check the status and condition of the blade before cutting
Due to continuous product development, the present manual may be modified.
No changes will be reported separately.
For more information check www.exacttools.com