Manual UVC Air Sanitizer V1000E
13.11.2020
Page
6
of
33
2.2 Risk Situations
Risk of injury due to the possibility of falling objects during the assembly or disassembly
of the Air Sanitizer product.
•
Protection objective: avoid injury from falling parts.
•
Wear appropriate safety shoes, gloves and helmet.
•
Make sure the area is clear under the product during installation and no persons are
present.
Risk of hitting the head with the Air Sanitizer product during set up or dismantle process.
•
Protection objective: avoid injury from hitting the head.
•
Wear a helmet
Incorrect installation may lead to certain parts of the Air Sanitizer product or the entire Air
Sanitizer product to fall down.
•
Protection objective: prevent personal injury and property damage.
•
Double check the Air Sanitizer and its installation.
Insufficient load capacity of the supporting structure may lead to certain parts of Air
Sanitizer product or the entire Air Sanitizer product to fall down.
•
Protection objective: prevent personal injury and property damage.
•
Provide adequate dimensioning of the supporting structure. The supporting structure
must be able to support the combined weight of all the equipment attached to, or hung
from it.
•
Ensure correct installation of the supporting structure.
Only use correct mounting material to attach the Air Sanitizer product to the supporting
structure (wall, ceiling, truss etc). Otherwise parts or the whole system may fall down.
•
Protection objective: prevent personal injury or property damage.
•
Only use correct mounting material such as screws, screw anchor etc depending on the
given circumstances.
The fingers or the hand of the user can be caught between clamping ring of V1000E and
the housing during maintenance or service work
•
Protection objective: prevent personal injury
•
When clamping ring is removed and reinserted be careful to avoid personal injury. Wear
safety gloves.
Risk of product damage when touching the UVC tube or the reflector material with bare
hands.
•
Protection objective: prevent product damage
•
The UVC tube and the reflector material shall not be touched with bare hands as
moisture or oil on the hands can damage the product or reduce its performance.
•
Wear clean and proper safety gloves
Risk of injuries by broken glass. The housing of the UVC tube is made of glass. If the
glass breaks, the persons who are doing service work may cut themselves with parts of a
broken UVC tube.
•
Protection objective: prevent personal injury from broken glass.
•
Be careful while handling the UVC tubes as they are fragile and always wear safety
gloves.
Risk of injuries by touching a hot surface. The glass and the ceramic housing of the UVC
tube gets hot during operation. When doing service work the UVC tubes might still be hot
although the system is turned off and disconnected from the power supply.
•
Protection objective: prevent personal injury from touching hot surfaces
•
Prior touching a UVC tube wait for it to cool down and wear safety gloves.
