NL
FR
PL
EN
SV
DE
11
supervised when in the vicinity of
the product whether it is working or
use this heater if it has
use if there are visible
: Use this heater on a
use the heater on deep pile
carpets or the long hair type of rugs,
or less than 750mm (30”) away
from any overhanging surface.
Keep combustible materials such
as drapes and other furnishings
clear from the front, sides and rear
of the heater. Do not use heater to
: Do not use this heater
in small rooms when they are
occupied by persons not capable
of leaving the room on their own,
unless constant supervision is
TKܪWJ
keep textiles, curtains or any other
RNSNRZR
distance of 1m from the air outlet.
GJQTSLX YT
the appliance and must be kept in a
safe place. If changing owners, the
YMJ
SPECIFICATIONS
Model
RUGGED3Y
EAN code
3 461 710 000 006
Power
3000 W
Thermostat
Electromechanical
Heat Settings
2 : 1500W / 3000W
Fan Mode
Yes
Handle
Yes, 2 cold handles
IP21 Protection
Yes
Overheat protection
Yes
Anti-tilt protection
Yes
Voltage
230-240V~
Frequency
-_
Product dimensions (WxDxH)
W24.6 x D16.2 x H24.8 cm
Produit weight
2.35 kg
ELECTRICAL CONNECTION
4SQ^UQZLYMJFUUQNFSHJTSYTF[TQYFQYJWSFYNSLHZWWJSYUT\JWXZUUQ^WJXUJHYYMJNSINHFYNTSXTSYMJNIJSYNܪHFYNTS
plate) and to an electrical installation which complies with the relevant standards. Please read the safety and installation
instructions carefully prior to switching the appliance on.
INSTRUCTION FOR USE
Heat control – Switch Knob (See 2, Fig. 1)
OFF
Cool Blow*
Half Heat
Full Heat
Thermostat control knob (See 3, Fig. 1)
The heat output is controlled by the thermostat, according to the room temperature.
Turn the thermostat knob fully clockwise to maximum setting initially. When the room is warm
enough, reduce the setting slowly until the heater just clicks off.
The heater will now cycle on and off to maintain your selected room temperature.
An audible click may be heard when the thermostat operates - this is normal.
Note: If the heater does not come on when the thermostat is at a low setting, this is normally
because the room is warmer than the thermostat setting and is not a fault.
When the heat control is set to
for cool blow, set the thermostat control (3) to maximum.
Position
will turn the heater on and off to maintain a temperature of approximately 5°.
RUGGED3Y_A5.indd 11
20/07/20//30 16:01
Summary of Contents for 3 461 710 000 006
Page 37: ...37 ...
Page 38: ...38 ...
Page 39: ...39 ...
Page 40: ...GDHV Dunleer Co Louth Ireland ...
