Configuration
26 (44)
3.5.2
Configuration | Devices
Fig. 34
Devices configuration page
Each connected Modbus device must be configured with a unique Modbus slave address and
be assigned a device template.
Devices can be added automatically by clicking on
Autodetect
. The Autodetect function will
scan each Modbus address in turn, using the current Modbus serial interface settings (this may
take several minutes).
Fig. 35
Autodetect devices
If the templates support identification of Modbus devices the correct template will automatically
be assigned to a detected device. Otherwise, the template must be assigned manually. To add
a device manually, click on
Add device
.
Device
Name
The name of the device
Template
The template to use with this device
Modbus/TCP server IP
address
The IP address to use for a Modbus-TCP device
Modbus/TCP server
port
The port used to connect to the Modbus-TCP server. Default = 502.
Modbus slave address
The unique Modbus slave address
Some templates support device-specific pre-configured alarms. The alarm conditions are set in
the template and cannot be changed.
Device-specific alarms
Set
Click
Set
to set all alarms in the alarm list or an alarm group preconfigured in the
template. To set a single alarm, use the check box for each alarm.
The drop-down list to select an alarm class can be applied to a whole group or a
single alarm. See also
Add/edit alarm parameters, p. 30
.
Clear
Clear all alarms for the device specific alarm list or alarm group.
Netbiter LC300 Series User Manual
SCM-1202-047
1.2
