Design and function
TIG Synergic operating principle
099-000141-EW501
12.01.2016
45
5.13.3 Welding task selection
The welding task is selected using the buttons on the machine control on the welding machine.
Signal lights (LED) display the welding parameter selection.
It is only possible to change the basic parameters when no welding current is flowing and any
possible access control is disabled.
Operating
element
Action Result
Select and display welding process
Select and display seam type
Select and display material type
Select and display “electrode diameter” / “ignition optimisation”
Select and display operating mode
5.13.4 Select
welding
current
The user has two options for setting the required welding current:
• Using the sheet metal thickness
• Directly as welding current
The welding current is displayed in the left-hand display. The “Material thickness” parameter can
be selected in the right-hand display.
Control element Action
Result
Display (right)
X x
Press button until signal light
Material Thickness comes on.
Material thickness in
mm is displayed.
Set welding current or sheet metal thickness.
Welding current and
sheet metal thickness
are displayed
