Rectifying faults
Resetting JOBs (welding tasks) to the factory settings
90
099-005231-EW501
10.05.2012
b) The error message can be reset by pressing a key button:
Welding machine control
Key button
RC1 / RC2
Expert
CarExpert / Progress (M3.11)
alpha Q / Concept / Basic / Basic S / Synergic /
Synergic S / Progress (M3.71)
not possible
c) The error message can only be reset by switching the machine off and on again.
The shielding gas error (Err 6) can be reset by pressing the "Welding parameters" key button.
7.3
Resetting JOBs (welding tasks) to the factory settings
7.3.1
Resetting a single JOB
JOB-
LIST
m /m in
JOB-
LIST
Figure 7-1
Display Setting/selection
Reset to factory settings
The RESET will be done after pressing the button.
The menu will be ended when no changes are done after 3 sec.
JOB-number (example)
The shown JOB will be set to ex works.
