Machine control
– Operating elements
Overview of control sections
099-00T406-EW501
13.07.2017
9
3.1.1
Control section A
Figure 3-2
Item Symbol
Description
0
1
Welding data display (3-digit)
Displays the welding parameters and the corresponding values
> see 3.2 chapter
2
Gas test push-button
> see 4.1.1 chapter
3
Operating mode
> see 4.1.5 chapter
/ power-saving mode push-
button
> see 4.3 chapter
--------- Latched
------- Non-latched
------ spotArc spot welding procedure
– signal light turns green
------ spotmatic spot welding procedure
–signal light turns red
-------- Press button for long interval to put machine into power-saving mode.
Activate one of the operating elements to reactivate.
4
Pulsed welding push-button
TIG ------- pulsed welding
> see 4.1.6 chapter
MMA ----- pulsed welding
> see 4.2.2 chapter
5
Welding current polarity push-button
-------- DC welding with negative polarity at the torch (or electrode holder) with
respect to the workpiece.
--- Alternating current welding/alternating current forms
> see 4.1.3.2 chapter
6
Welding procedure push-button
--------- TIG welding
--------- MMA welding
7
Display switching push-button
kW ------- Welding power display
V ---------- Welding voltage display
8
Welding data display (3-digit)
Displays the welding parameters and the corresponding values
> see 3.2 chapter
9
TIG ignition type signal light
Signal light on: Lift arc ignition active/HF start off. You can switch the ignition type in the
Expert menu (TIG)
> see 4.1.10 chapter
.
