Functional characteristics
TIG welding
099-00T406-EW501
13.07.2017
35
4.1.10 Expert menu (TIG)
The Expert menu has adjustable parameters stored that don’t require regular setting. The number of pa-
rameters shown may be limited, e.g. if a function is deactivated.
ENTER
EXIT
Figure 4-22
Display
Setting/selection
Expert menu
Ignition type (TIG)
------- HF start active (ex works)
------- Lift arc ignition active
activArc parameter
Parameter also adjustable after TIG activArc welding is activated.
Gas pre-flow time
Ignition current
Setting range in percent: depending on main current
Setting range, absolute: Imin to Imax.
End-crater current
Setting range in percent: depending on main current
Setting range, absolute: Imin to Imax.
