Design and function
Scope of delivery
099-008232-EW501
26.05.2020
9
5
Design and function
WARNING
Risk of injury from electrical voltage!
Contact with live parts, e.g. power connections, can be fatal!
• Observe the safety information on the first pages of the operating instructions!
• Commissioning must be carried out by persons who are specifically trained in handling
power sources!
• Connect connection or power cables while the machine is switched off!
Risk of burns and electric shock on the welding torch!
Welding torch (torch neck or torch head) and coolant (water-cooled version) heat up
strongly during the welding process. During assembly work, you may come into touch
with electrical voltage or hot components.
• Wear proper protective equipment!
• Switch off the power source or torch cooling and allow the welding torch to cool!
CAUTION
Risk of injury from heated coolant and its connections!
The coolant used and its connection or connection points can heat up significantly
during operation (water-cooled version). When opening the coolant circuit, escaping
coolant may cause scalding.
• Open the coolant circuit only when the power source or cooling unit is switched off!
• Wear proper protective equipment (protective gloves)!
• Seal open connections of the hose leads with suitable plugs.
Risk from electrical current!
If welding is carried out alternately using different methods and if a welding torch and
an electrode holder remain connected to the machine, the open-circuit/welding voltage
is applied simultaneously on all cables.
• The torch and the electrode holder should therefore always be placed on an insulated
surface before starting work and during breaks.
After each opening of the welding torch, using the "gas test" "gas flush" function and increased
flow rates, remove moisture, atmospheric oxygen and any impurities from the welding torch.
Machine damage due to incompletely assembled welding torch!
Incomplete assembly may destroy the welding torch.
• Always assemble the welding torch completely.
Read and observe the documentation to all system and accessory components!
5.1 Scope of delivery
The delivery is checked and packaged carefully before dispatch, however it is not possible to exclude the
possibility of damage during transit.
Receiving inspection
• Check that the delivery is complete using the delivery note!
In the event of damage to the packaging
• Check the delivery for damage (visual inspection)!
In the event of complaints
If the delivery has been damaged during transport:
• Please contact the last haulier immediately!
• Keep the packaging (for possible checking by the haulier or for the return shipment).
Packaging for returns
If possible, please use the original packaging and the original packaging material. If you have any queries
on packaging and protection during transport, please contact your supplier.
