Design and function
PC interface
099-005549-EW501
12.11.2018
37
5.7
PC interface
Equipment damage or faults may occur if the PC is connected incorrectly!
Not using the SECINT X10USB interface results in equipment damage or faults in signal
transmission. The PC may be destroyed due to high frequency ignition pulses.
• Interface SECINT X10USB must be connected between the PC and the welding machine!
• The connection must only be made using the cables supplied (do not use any additional
extension cables)!
PC 300 welding parameter software
Set all welding parameters on the PC and simply transfer to one or more welding machines (accessory,
set consisting of software, interface, connection leads)
• Manage up to 510 JOBs
• Exchange JOBs with the welding machine
• Online data communication
• Default settings for welding data monitoring
• Always up-to-date thanks to standard update function for new welding parameters
• Data backup by easy communication between power source and PC
Figure 5-18
Item Symbol
Description
0
1
PC interface, serial (D-Sub connection socket, 9-pole)
2
Connection cable, 9-pole, serial
3
SECINT X10 USB
4
USB connection
5
Windows PC
5.8
Access control
For selection of the welding task and for general operation see the relevant Control operating instructions.
