Design and function
Special parameters (advanced settings)
099-005403-EW501
18.08.2016
93
Display
Setting/selection
Predefined pulse arc welding process in the PA program
0 = -------- Predefined pulse arc welding process in the PA program is disabled.
1 = -------- If the superPuls and welding process switching functions are available and
activated, the pulse arc welding process is always executed in the main
program PA (ex factory).
Predefined absolute value for relative programs
Start program (P
START
), down-slope program (P
B
) and end program (P
END
) can be set
relative to the main program (P
A
) or in an absolute manner, as desired.
0 = -------- Relative parameter setting (ex factory)
1 = -------- Absolute parameter setting
Electronic gas flow control, type
1 = -------- type A (ex works)
0 = -------- type B
Program settings for relative programs
0 = -------- Combined setting of relative programs possible (ex works).
1 = -------- Individual setting of relative programs possible (ex works).
Correction or nominal voltage display
0 = -------- Correction voltage display (ex works).
1 = -------- Absolute nominal voltage display.
5.10.1.1 Reset to factory settings
All special parameters saved by the user will be overwritten by the factory settings!
l
0
l
0
