Machine description
– quick overview
Machine control
– Operating elements
099-005403-EW501
18.08.2016
19
4.3
Machine control
– Operating elements
Figure 4-4
Item Symbol
Description
0
1
Functional sequence
> see 4.3.1 chapter
2
JOB-
LIST
Welding task push-button (JOB)
Select the welding task from the welding task list (JOB-LIST). The list can be found
inside the protective cap on the wire feeder and in the appendix to these operating
instructions.
3
Display, left
Welding current, material thickness, wire speed, hold values
4
Push-button, parameter selection left/power-saving mode
AMP ----- Welding current
-------- Material thickness
> see 5.3.6.2 chapter
-------- Wire feed speed
Hold ------ After welding, the values used last are shown from the main program. The
signal light is illuminated.
STBY ---- Press for 2 s to put machine into power-saving mode.
To reactivate, activate one of the operating elements
> see 5.11.3 chapter
.
5
Display, JOB
Shows the currently selected welding task (JOB number).
6
Welding parameter setting, rotary dial
For setting the welding performance, for selecting the JOB (welding task) and for
setting other welding parameters.
