Functional characteristics
MIG/MAG welding
Item No.: 099-004833-EWM01
65
5.2.10
MIG/MAG Powercontrol program torch
The control leads for the torches described in this chapter are fitted with a 19-pole connection
socket.
5.2.10.1
Powercontrol program torch with one rocker (standard function, factory setting)
Retrieving welding programs and program sequences (program function)
Changeover switch in WF unit to "Program" (see "Internal operating elements" chapter)
Operating elements
Functions
1 torch trigger
Welding On/Off
1 rocker
Retrieve 10 welding programs (0 to 9)
8
7 segment display
Display the relevant program number
Program P
A0
: Setting on the wire feed unit.
Program P
A1
- P
A9
: Setting, e.g. on M3.10/M3.11 (see MIG/MAG program sequence "Program steps
mode") or on the PHOENIX R40 remote control.
Infinitely adjustable setting of welding performance (Up/Down function)
Changeover switch in WF unit to "Up / Down" (see "Internal operating elements" chapter)
Operating elements
Functions
1 torch trigger
Welding On/Off
1 rocker
Infinitely adjustable
operating point setting (one-dial operation / Synergic)
8
7 segment display
Display 0 to 9
Infinite adjustment of wire speed from 1% to 100% of the wire speed set on the wire feed unit.
The arc length is corrected on the wire feed unit.
5.2.10.2
Up / Down torch with two rockers (standard function, factory setting)
Infinitely adjustable setting of welding performance (Up/Down function)
Changeover switch in WF unit to "Up / Down" (see "Internal operating elements" chapter)
Operating elements
Functions
1 torch trigger
Welding On/Off
1st rocker
Infinitely adjustable
operating point setting (one-dial operation / Synergic)
2nd rocker
Infinitely adjustable arc length correction setting
1
st
rocker: Infinite adjustment of wire speed from 1% to 100% of the wire speed set on the wire
feed unit.
2
nd
rocker: Infinite adjustment (absolute) arc length correction from (
±
10V), regardless of the
setting on the wire feed unit.
Calling up welding programs or program sequences
Changeover switch in WF unit to "Program" (see "Internal operating elements" chapter)
Operating elements
Functions
1 torch trigger
Welding On/Off
1st rocker
Retrieve 10 welding programs (0 to 9)
2nd rocker
No function
Program 0: Setting on the wire feed control.
Program 1 - 9: Setting on welding machine control M3.10 / M3.11 or on remote control PHOENIX
R40, for example.
