EWM HIGHTEC WELDING GmbH
Dr.-Günter - Henle - Straße 8; D-56271 Mündersbach
Phone: +49 (0)2680.181-0; Fax: +49 (0)2680.181-244
Internet:
www.ewm.de
; E-mail:
Operating instructions
inverter
TIG DC welding machines
from 150A – 300A
portable
inverter
TIG 200 DC
powerSinus
power
Cooler
inverter
TIG 150 DC
inverter
TIG 250 DC
inverter
TIG 300 DC
These operating instructions must be read before commissioning!
Failure to do so may be dangerous!
Machines may only be operated by personnel familiar with the appropriate safety regulations!
The machines bear the conformity mark - and thus comply with the
?EC Low Voltage Guideline (73/23/EEC)
?EC EMV Directive (89/336/EEC)
(The CE Mark is only required in EC member states)
In compliance with VDE 0544 (EN 60974-1), the machines can be used in environments with
an increased electrical hazard.
2000 We reserve the right to make amendments. Art. No.: 099-000016-EWM01 Revised: 28.08.2000
