Design and function
MIG/MAG welding
099-005507-EW501
13.09.2018
61
Example 1: Welding workpieces with different sheet metal thicknesses (non-latched)
Figure 5-50
Example 2: Welding different positions on a workpiece (latched)
Figure 5-51
Example 3: Aluminium welding of different sheet metal thicknesses (non-latched or latched
special)
Figure 5-52
Up to 16 programs (P
A0
to P
A15
) can be defined.
An operating point (wire speed, arc length correction, dynamics/choke effect) can be defined
permanently in each program.
Program P0 is an exception: the settings for operating points are made manually here.
Changes to the welding parameters are saved immediately!
5.4.12.1 Selecting parameters (program A)
Changes to the welding parameters can only be made when the key switch is in position "1".
Figure 5-53
Select program number.
