EVVO 20000TLG23P~EVVO 33000TLG23P
EVVO 20000TLG23P~EVVO 33000TLG23P
53
54
Setting P(f)
Users press
“Back” button to enter “1.Enter setting” interface, Press OK button to enter main
setting interface. Enter
“19. Setting P(f)” by pressing “Up” button Or “Down” button, then
press
“OK” button and enter “Setting P(f)”interface. Then press Confirm button to start to Set
P(f). "Success" will be shown on the screen after a successful P(f) setting.
Setting Q(v)
Users press
“Back” button to enter “1.Enter setting” interface, Press OK button to enter main
setting interface. Enter
“20. Setting Q(v) by pressing “Up” button Or “Down” button, then
press
“OK” button . Then press Confirm button to start to set Q(v)."Success" will be shown on
the screen after a successful Q(v) setting.
Control 81.S1
Users press
“Back” button to enter “1.Enter setting” interface, Press OK button to enter main
setting interface. Enter
“21.Control 81.S1 by pressing “Up” button Or “Down” button, then
press
“OK” button. Then press Confirm button to start Control 81.S1.
(B)
“Event List” Interface as below:
Event List is used to display the real-time event records, including the total number of events
and each specific ID No. and happening time. User can enter Event List interface through
main interface to check details of real-time event records, Event will be listed by the
happening time, and recent events will be listed in the front. Please refer to below picture:
Users press
“Back” button and “Down” button in standard interface, then enter into 2.Event
List” interface.
Press “OK” button to get the total event numbers, show as below:
(C)
“System Info” Interface as below:
3
.
SystemInfo
1.Inverter Type
2.Serial Number
3.SoftVersion
4.HardVersion
5.Country
6.Input Mode
7.Relay Command
8.Safety Paras
9.Power Factor
10.Reflux
11.P(f)
12.Q(v)
Inverter Type
Users press
“Back”
button and
“Up”
button or
“Down”
button enter “3. System Info”
Press
”OK“ button again; user can check each event ID number and happening time, see below:
interface, Press
“OK” button to enter enter into system information checking interface,
then press
“Up” button or “Down” button enter into “1. Inverter Type”,then press “OK”
button
，
the Inverter Type will be displayed.
Serial Number
Users press
“Back”
button and
“Up”
button or
“Down”
button to enter “3. System Info”
Key“OK”
interface, Press
”OK“ button to enter enter into system information checking interface,
then
press “Up” button or “Down” button enter into “2. Serial Number”, then press “OK”
button
,the serial number will be displayed.
Soft Version
Key“OK”
Users press
“Back”
button and
“Up”
button or
“Down”
button to enter “3. System Info”
Key“OK”
Event ID
NO.
interface, then Press “OK” button to enter enter into system information checking
interface, then
press “Up” button or “Down” button enter into “3. Soft Version”, then
press “OK” button
，
the Soft Version will be displayed.
Hard Version
Happening time
Users press “Back” button and “Up” button or “Down” button to enter “3. System Info”
interface, then Press “OK” button to enter enter into system information checking
interface, then press
“Up” button or “Down” button enter into “4. Hard Version”, then
press“OK” button
，
the Hard Version will be displayed.
Events AllNum:02
2013-10-31 16:42
ID91
2.EventList
Events TotalNum:02
