11
USE WITH KÜSTER/PHOENIX CONTACT MOTOR LOCK
For use with a motor lock (Küster 02S 0156758, Phoenix contact EV-
T2M3S-E-LOCK12V or similar) the charge controller lock outputs are
configured as follows:
B – signal. If the motor is locked or unlocked 0V is expected,
oth12V.
R and W – Locking of motor is powered through these outputs for
locking and unlocking. Locking is done with 600ms pulse. If it is
detected that the motor has not functioned, the locking/unlocking
action is repeated after 5 seconds. If the locking action is reverse,
the wires should be swapped between R and W connections.
Connection of Küster/Phoenix contact motor:
L
N
CONT
Y
G
R
PE
B
R
W
PE
CP
PP
IC
PE
M
W
R
B
Blue/Yellow
Blue/Green
Blue/Brown
Blue/Red
R=
R=
There can be different colour codes for the wires of locking motors,
therefore it is advised to consult the datasheet of the
