10
USE WITH SOLENOID LOCK DSIEC-ELC
For use with solenoid lock (DUOSIDA DSIEC-EL or similar) the
charge controller outputs are configured as follows:
R and W – solenoid is powered through these outputs for locking.
Solenoid stays locked while power is supplied and unlocking
happens when power is cut. If the locking action is reverse, the
wires should be swapped between R and W connections.
B – Not used.
Connection of DSIEC-ELC solenoid:
L
N
CONT
Y
G
R
PE
B
R
W
PE
CP
PP
IC
PE
W
R
B
White
Yellow
Red
Blue
S
There can be different colour wires used for DSIEC-ELC solenoids,
therefore it is advised to consult the datasheet of the
manufacturer. The connections can also be determined using a
multimeter.
