Evolveo StrongVision 2GB, Manual

Page: 91 / 158

SMS commands
The camera trap can be remotely controlled using SMS commands.
Create a new SMS message on your phone and enter the phone
number of the SIM card that is inserted in the camera trap. The body
of the message must contain one of the commands as specified in
the following table:
The SMS commands are as follows:
Comma
nd
Function
Meaning
*530*
Turns on the camera trap
The camera trap starts to
operate.
*531*
The camera trap in sleep mode The camera trap enters power saving
mode, i.e. it saves images to the SD
card but it does not send data or MMS.
*500*
Capture
The camera trap takes a photo and
sends it to the set EMAIL.
*505*
Capture and get a photo (MMS
mode)
The camera trap takes a photo
and sends it to the phone.
Available only if the camera
trap is set to MMS.
*520*
Get information about the photo.
The camera trap sends
information about the number
of possible photos and the
battery level.
91